Meyertech ZoneVu 328 Series Technické informace stáhnout pdf (Strana 14)

©Meyertech Ltd 2007 Tel: +44 (0)161 628 8406 Email: [email protected]DS0703-0.3 ZVM328

www.meyertech.co.uk/zonevu.htm

ZoneVu ZVM 328 Video Matrix SySteM

Meyertech Ltd. Ofce Block One, Southlink Business Park, Oldham OL4 1DE

The purpose of this data sheet is to provide product information on Meyertech products. The information in this data

sheet is believed to be accurate and reliable. However, no responsibility or liability is assumed by Meyertech Limited

for its use, or for any infringement of patents or other rights of third parties, which may result from its use. No li-

cense is granted by implication or otherwise under any patent or other rights of Meyertech Limited. Meyertech are

committed to continuous product development and therefore reserve the right to change specication without notice.

ordering inForMation

ZVM-164 Series 328 Video Matrix 16 input x 4 output. Non expandable

ZVM-328 Series 328 Video Matrix 32 input x 8 output

ZVM-648 Series 328 Video Matrix 64 input x 8 output

ZVM-968 Series 328 Video Matrix 96 input x 8 output

ZVM-3216 Series 328 Video Matrix 32 input x 16 output. Non expandable

ZVM-PSU Series 328 PSU. Power-cube type. 230VAC I/P 12VDC O/P

For 3rd party dome protocols add: MEY for Meyertech; PEL for Pelco D; VCL for VCL; JVC for JVC; MME for Mark Mercer.

aPPlications

Many systems these days cover

large areas which requires expensive

infrastructure to bring each camera

individually back to the main control

location, however with Meyertech’s

ZoneVu range of products it is possible

to greatly reduce the infrastructure

requirements by utilising the ZVM-328

matrix to operate as a local hub gathering

cameras together within a local area.

The matrix can then switch the required

cameras onto the video trunks back to

the main control room as controlled

by the operators using Meyertech’s

inter-site system architecture.

This means that instead of needing

dozens of video paths between eld

cameras and the central control

point the number can be reduced to

eight or less with full control of all

of the cameras still being possible.

All that is required between the ZoneVu

site controllers at each matrix location is

a single RS485 half duplex connection.

sPeciFication

Enclosure Euro rack standard. Aluminium and mild steel construction

Power Input 12VDC Power Supply (included) from 230VAC

Current Consumption 650mA

Power Consumption Less than 8 Watts

Weight 3.2kg

Video Inputs/Outputs 1V pk-pk 75R

Video Connectors Standard BNC with link for 75R termination (removable)

Crosstalk Better than 50dB

Signal to Noise Ratio Better than 50dB

Conguration Localised RJ-11 Engineering Keyboard Socket

ZoneVu Network Port Twisted Pair Half Duplex RS-422 Network @ 9600 Baud

Communications Port 9pin D-type connector (Female)

Camera Control Twisted Pair RS-422/ VICTA™ Telemetry software congurable to drive

ZoneVu, DomeVu and third party Domes and Receivers

Dimensions 19” by 3U (482mm x 132mm x 75mm)

Temperature Operational 0°C to +40°C, Storage -20°C to +60°C Humidity 10% to

95% (Non-condensing)

OSD Captions congurable for Cameras, Monitors & Alarms + Real Time

Clock - Y2K Compliant

Video Loss detection Video loss congurable on all 32 inputs

Contact Alarms 32 Normally Open/Closed Contacts, Powerful Event Handling, Program-

mable Queue Type and Length

Alarm Connection 25 pin D-type Connector (Female)

Sequencing 8 patterns of up to 32 cameras, Dwell time range 1 to 99 seconds

Camera Captions 24 Characters each for 32 cameras selectable on or off for each monitor

Monitor Captions 5 Characters each for the 8 monitors selectable on or off per monitor

Alarm Captions 10 Characters each for 32 contact alarms

rear Panel

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 57 58

Komentáře k této Příručce

Žádné komentáře

Meyertech ZoneVu 328 Series Technické informace Strana 14

Komentáře k této Příručce